HAGS UNIPLAY
Technical specifications

TIMBER ROOFS. Planed, tongued and grooved pine boards 21´120 mm. They come pre-treated to resist rot and finished with 1´ coat of penetrating primer and 2´ coat of film-forming woodstain finisher.

PLYWOOD ROOFS. Planed pine or HPL rafters in 28´93 mm and 45´45 mm dimensions. Phenolic-treated 15 mm plywood roofing board.

STEEL ROOF. Open. Made of 38 mm tubular steel.

HPL ROOF. Open. Roof spire in 15 mm HPL, with 3 mm steel fittings.

WALL SECTIONS IN HPL
are made from 15 mm HPL, milled to provide a smooth, gently rounded edge. 3 mm steel fittings.

WALL SECTIONS IN WOOD
are made from 21´93 mm and 21´70 mm pine boards, pre-treated to resist rot and held together by hydraulically inserted steel plates, covered with decorative strips.

WALL SECTIONS IN STEEL are made from 25 mm tubular steel and
channel-beam (U-beam) metal.

POSTS AND BEAMS.
A 110 mm diameter laminated timber construction for unbeatable stability and an excellent surface finish.

FLOOR SECTIONS. The 33x120 mm timbers in the framework are joined at the corners by hydraulically inserted steel plates for a safe, secure construction. The same technique is also used to hold the 28´120 mm boards in place, providing a flush, even walking surface totally free from nail-heads and screws.

COMPOSITE FLOORS. Composite steel floor deck profiles.
Surface of 18 mm recycled rubber-coated polyethene.

METAL FLOORS. Walking surface of ribbed, edge-pressed aluminium decking on a frame of pressed steel profiles.

GUARD RAILS. Manufactured in robust 32 mm and 38 mm tubular steel.

WOODEN STEPS. Steps and side-walls in 33´170 mm pine. Handrails of shaped tubular steel.

HPL STEPS. Steps of 18 mm recycled rubber-coated polyethene. Sides of 18 mm HPL. Handrails of shaped tubular steel.

ANCHORING SYSTEMS.
Pre-cast, rounded concrete foundations or a hot-galvanised steel anchor are supplied as standard. The foundation depth is 40 cm or in certain instances 60 cm. For concrete foundations poured on site, please order the HAGS metal foundation post. A 90 cm post is also available for particularly demanding foundation work.
UNIPLAY is also available for above-ground installation using bolt anchoring.

HAGS POSTS WON’T ROT
1. A patented footing design that keeps the timber well away
from the ground.
2. Wood treated to protect against rot and finished
with 2´ coats of penetrating, film-forming
woodstain.
3. Posts with HAGS end caps to prevent moisture
penetrating the endwood fibres.
All thanks to our constructive approach to environmental and
quality work.

HAGS UNIPLAY - Technical specifications

SURFACE REQUIREMENTS
Soft surface in accordance with EN 1177.

ASSEMBLY SPECIFICATIONS
Roof, wall and flooring sections all fit snug up to the centre of the assembly posts. Wall sections have patented concave frame rails to fit the rounded posts.

INSPECTION
Weekly.

MAINTENANCE
Once a season. Please also refer to page 254.

MODULE SIZES
1.00 and 1.42 m. All modules are fully compatible with one another.

WOOD PROTECTION TREATMENT
All timber components are treated after machining in accordance with European standard EN 351, Class P5 and the directives of the Nordic Wood Preservation Council.

DIFFERENT MATERIALS AND TREATMENTS
Wood: Fine-ringed Swedish pine treated with a wood protector and then with 1´ coat of penetrating primer and 1´ coat of film-forming woodstain finisher. For colour options, please see below.

Steel: Hot-galvanised or powder-lacquered with polyester-type powder. Components are electro-galvanised and primed before being powder-lacquered.

Plywood: Protected on both sides with
a phenolic film coating.

HPL: High Pressure Laminate.

Chain: Hot-galvanised and inspected and approved to comply with current regulations on tensile strength.

Hardware: Steel, hot-galvanised or electro-galvanised with a 20 µm coating and protected by the Corrosil anti-corrosion system.

Screw joints: These incorporate specially designed HAGS covers to protect against vandalism.

Recycled polythene: Made of old polythene packaging products that are ground down and then extruded and formed into boards. The 3 mm rubber coating gives a better grip and enhances comfort.

ROOFS
The choice of different construction materials, shapes and sizes offered by HAGS gives you greater flexibility and more scope to vary the appearance of your UNIPLAY designs. The roof is one of the constructional features
that contribute most to the character of any building.

FLOORS
The basis for the HAGS UNIPLAY system are the triangular and rectangular modules. All these modules can be integrated into one and the same piece of play equipment and by combining triangular floors (45°, 60° and 90°) with rectangular ones, there is practically no limit to what you can build.
Give free rein to your imagination and let us help you build your own unique HAGS UNIPLAY combinations - with rectangular and triangular modules, open spaces and cosy cubby-holes, symmetrical shapes and irregular ones,
plus walls and screens for all module sizes. And remember, UNIPLAY has all the play features you could ever want.

HAGS UNIPLAY Above ground outdoors

Our specially designed fittings for HAGS UNIPLAY allow equipment tobe installed on concrete surfaces without the need for sunken foundations or poured concrete.
These fittings are designed for use on concrete surfaces together with rubber matting. Swing sets should be anchored in place using the expansion bolts supplied by HAGS. The UNIPLAY post footings must be dimensioned to correspond with the height and construction of the play equipment that is being installed.
The surface under and around the play equipment must always comply with current safety standards. Please contact your HAGS representative for more information.