Untitled Document

Technical Specifications HAGS Agito

Design: T-design

Safer surfacing:
The safer surfacing must be shock-absorbing in accordance
with EN 1176.

Degree of assembly:
HAGS Agito play systems are assembled on site. The
combination can be dismantled and re-assembled.

Anchoring:
Ground anchoring for sinking into sand/gravel is standard.

The combination can also be anchored above ground, in which case it will be attached to a concrete slab. Only the bottom anchoring part needs to be replaced – the same pole can be used regardless of how the system is anchored. If you want to anchor the combination in loose fi ll material other than sand/gravel, contact your salesperson at HAGS for further consultation.

For all types of anchoring, the shock-absorbing safer surfacing
must meet the requirements of EN 1176.

Patent-pending pole anchoring:
The joint for the ground anchoring part is simple to attach and fi x in the vertical position. The design is patent-pending.

Inspection and maintenance:
A HAGS Agito combination should be inspected every week. Maintenance takes place once a season.

Materials:
The poles used in HAGS Agito are manufactured from highstrength steel tubing, Ø 127 mm. The tubing is pre-galvanised both externally and internally. They are powder-coated on the outside.

The mobile climbing ladders are clamped into rubber elements that ensure their fl exibility. The design of the rubber elements contributes to limiting the maximum movement. The Glider and Rodeo play functions and Agito’s pole tops are manufactured from rotation-cast polyethylene. Steep and Leaf are manufactured from the recycled material EkoGrip– a grey-black disc with a rubber wearing surface. For the huge climbing wall Cliff Hanger, Sail and Jungle Road, we have used HPL – a maintenance-free high-pressure laminate that can cope with the demanding outdoor environment. The black balls in Trunk, Branch and Wiggler, as for Punch, are manufactured from a fl exible microcell foam polyurethane. This material is also used in the seat for Rocks, Starter and in the board for Skater. The Punch punch bag has been reinforced with a steel frame in order to reduce the risk of damage. The climbing frames are manufactured from nylon-spun steel cable that provides maximum strength and resistance against injury. The frame attachments are made from steel and aluminium.

Hot-galvanised steel components in the ground foundations.